| What you need to know | About system | Products | Download | Contact | References | |
| Metalic cabling | Optical cabling | Cabinets | Residential cabling | |
RESIDENTIAL CABLING |
|
|
Structured cabling KELine® HOME NETWORKING
|
||
|
||
| Do you plan to build or restore an apartment or a family house? Would you like to have your apartment/family house ready for digital era? Don’t forget about quality, well dimensioned, dateless cabling that is able to transmit all signals (PC, internet, TV, telephone, video-camera systems) needed for a modern household ready for digital era. System of structured cabling KELine® HOME NETWORKING serves to create universal and variable communication environment for both, common users as well as for IT telecommuters. | ||
Versatility |
||
| Structured cabling system KELine® HOME NETWORKING enables to connect practically and instantly TV, PC, telephone or radio to any connection spot - telecommunication outlet - with the same type RJ45 connector- by appropriate connection, if you like, adapter cable. Outlets are connected by installation cables to a distributor (distributive center). | ||
Future-proof |
||
| Structured cabling system KELine® HOME NETWORKING was designed to satisfy current and future requirements in regard to transfer speed. System has a very high capacity with the frequency range up to 1200 MHz, with the reserve which covers currently used frequencies for cable TV. Data components fulfill requirements for the category 5E (transmission of Gigabit Ethernet), 6A (transmission of 10 Gigabit Ethernet). This means that they will meet the requirements for network speed, which may occur in a future. System is ready for the modern technologies Triple Play – digital TV, IP telephone and fast DSL internet connection. | ||
Design |
||
Central elements of each cable system KELine® HOME NETWORKING are specially developed home and house distributors. |
||
 |
|
|
| House distributor with dimensions 600x600x300mm made of 1,5mm steel plate with no need for ventilation and a cooling system. Possibility to offset up to four 19“ devices. On regular basis, distributor consists of a holder for optical box and snub ledges. Distributor is prepared for installation of DIN rail with outlets 230V, a holder for optical box and snub ledges. The entrances of optical cables and feed cable 230V are offset by the cable grommets PG13, 5. The gap for installation cables is covered by a dust cover. | ||
 |
||
|
Structures cabling system KELine® HOME NETWORKING offers a wide range of outlets that meet strict transmission criteria and are integrable to all regularly used gutter systems. |
||
Distributors |
Home distributor is in two basic versions, for installation on a wall or into a wall. Distributor is prepared for installation of DIN rail with outlets 230V. . |
 |
|
|||
|
||||||
House distributor with dimensions 600x600x300mm made of 1,5mm steel plate with no need for ventilation and a cooling system. Possibility to offset up to four 19“ devices. On a regular basis, distributor consists of a holder for optical box and snub ledges. The entrances of optical cables and feed cable 230V are offset by the cable grommets PG13, 5. The gap for installation cables is covered by a dust cover. Distributor is prepared for installation of DIN rail with outlets 230V. . |
 |
|
|||
|
||||
Special connector RJ45 |
Special connector RJ45 (plug) Cat.5E for fast installation without no need to use tools enables to end the cable directly at the place of the installation, bespoke, and with no need to use crimping tools. It’s ideal for Triple-play providers as well as for gadgeteers. Universally applicable for shielded and unshielded cabling. It’s suitable for installation of the cables with a solid conductor from Ø 0,40 mm (AWG 26) to Ø 0,64 mm (AWG 23) or for the cables with a wire strand from 0,12mm2 (AWG 26/7) to 0,26mm2 (AWG 23/7), with the diameter of outer jacket Ø 4,5-8mm. |
|
||||
|
||||
Microsplitter for the module RJ45 |
|
Unique and elegant solution for standard modules RJ45 enables to use one connection spot up to four services. Shielded microspliter promotes 1- or 2-pair telephony, 2-pair Fast Ethernet (PC or VoIP device) and TV. Installation was never that easy and quick to pursue as with the microsplitter KES45. Mounting or dismantling consists in easy plugging in or unplugging, much like in case of a patch cable. Installed microspliter doesn’t stick out from the outlet. Four marked with numbers connection spots have service convertible colored markers to distinguish services. 1-pair (unshielded) and 2-pair (shielded) connectors intended for non-tool installation enable to configure connection cables according to individual needs. |
|
|
||||
|
||||
| 1-pair (unshielded) and 2-pair (shielded) connectors intended for non-tool installation enable to configure connection cables according to individual needs. 1-pair connector is intended for installation on a flat telephone cables (2,5x5mm) or a round cable with max. Ø 3,4mm, 2-pair connector is intended for a round cable with Ø 3, 2-5,5mm. Connectors are suitable for installation on cables with a solid conductor or a wire strand with AWG26 - AWG24 |
|
|
||||
|
||||||
Accessories HOME NETWORKING |
Shielded 6-port 10Giga patch panel Cat.6(A), meets the requirement to transmit 10 Gigabit Ethernet. |
 |
|
|||
|
||||
Modular stacking patch panel designed for home distributors is fully populated with GigaKELine® Swiss Snap-In modules Cat.5E made of halogen-free material, susceptible to tool-free installation of solid wires with diameter from Ø 0,40 mm (AWG 26) to Ø 0,65 mm (AWG 22) and stranded wires from AWG 26/7 to AWG 22/7. The changes in an interlinking sphere are enabled by simple replacement of positions of modules in the patch panels without the need of cable reinstallation. |
 |
|
|||
|
||||
DIN rail adapter populated with GigaKELine® Swiss Snap-In module Cat.5E made of halogen-free material, susceptible to tool-free installation of solid wires with diameter from O 0,40 mm (AWG 26) to O 0,65 mm (AWG 22) and stranded wires from AWG 26/7 to AWG 22/7. The modular solution of patch field on DIN rail spare space in home distributor. The changes in an interlinking sphere are enabled by simple replacement of positions of modules on the DIN rail without the need of cable reinstallation. |
 |
|
|||
|
||||
Desktop Gigabit Switch - 8 portov 10/100/1000 autosensing |
 |
|
|||
|
||||
CATV Balun enables replacement of the classical 75-ohm coaxial cable by the cable with screw pairs in many applications CATV, VHF and FM and therefore, integrates these services to structured cabling systems. Balun is suitable for the bandwidth from 5 to 862 MHz. Coaxial port has the connector F or IEC. Balun is passive element with no need of power supply. |
 |
|
|||
|
||||||
Connector IEC-female / IEC-female . |
 |
|
|||
|
||||
Amplifier / splitter ATR 4 enable distribution of a signal into four exits. It’s intended for tertiary networks TKR, for TV and R signals in wave-length 47 - 862 MHz. It has a high separating damping between outputs and good impedance adapting. On entry and outputs are F connectors. Power supply by an external adapter. |
 |
|
|||
|
||||
DIN rail with offset outlets 230V, secured by 10A circuit-breaker |
 |
|
|||
|
||||
Other components (installation cable, outlets, patch panels and patch cable) for KELine® HOME NETWORKING create standard portfolio of products KELine®, that you can find in section PRODUCTS. |
|
||
© All here quoted information are exclusively intellectual property of KELine® system owner. All Rights Reserved. |
